by 
Deep groove ball bearing is a common type of rolling bearing. The basic deep groove ball bearing has an outer ring, an inner ring, a group of steel balls and a group of retaining structures. The type code of deep groove ball bearing is 6. Deep groove ball bearing is mainly used to bear pure radial load, radial load and axial load at the same time. When it only bears pure radial load, the contact angle is zero. When the deep groove ball bearing has large radial clearance, it has the performance of angular contact bearing and can bear large axial load. The friction coefficient of deep groove ball bearing is very small and the limit speed is also very high. Especially under the high-speed operation condition with large axial load, deep groove ball bearing has more advantages than thrust ball bearing.
Deep groove ball bearing has simple structure and is easy to achieve high manufacturing accuracy compared with other types. Therefore, it is convenient for series mass production, low manufacturing cost and widespread use. In addition to the basic type, deep groove ball bearing also has various variant structures, such as deep groove ball bearing with dust cover; Deep groove ball bearing with rubber sealing ring; Deep groove ball bearing with stop groove; Deep groove ball bearing with large load capacity with ball loading notch; Double row deep groove ball bearing.
Standard deep groove ball bearings with dust cover are Z-type and 2Z-type. Those with dust cover on one side are Z-type and those with dust cover on both sides are 2Z type.
The bearing with dust cover is used under the conditions of difficult separate lubrication, inconvenient placement of lubricating oil circuit and inspection. The bearing has been filled with quantitative and brand dual-purpose lithium grease for rust prevention and lubrication in the manufacturer. The amount of grease injected into each set of bearing is usually 1 / 4 ~ 1 / 3 of the effective space in the bearing, and the amount of grease can also be increased or decreased according to the user’s requirements.
The injected grease can usually ensure that the bearing operates at – 40 ~ + 120 ℃. If users have higher requirements for bearings, they can also fill other performance and brand greases according to the situation. The bearing with dust cover can work effectively for a long time after grease injection, and there is no need to add grease during use. Bearings with dust cover are mostly used at both ends of rotors of small and medium-sized generators and motors, automobiles, tractors, air conditioners, fans, etc., as well as occasions with special requirements for bearing noise and vibration.
Standard deep groove ball bearings with sealing rings include contact sealed bearings RS (one side sealing), 2RS (two sides sealing) and non-contact sealed bearings RZ (one side sealing) and 2RZ (two sides sealing). The performance, greasing and application of the bearing with sealing ring are basically the same as those of the bearing with dust cover. The difference is that there is a large gap between the dust cover and the inner ring of the bearing with dust cover, but the gap between the sealing lip and the inner ring of the non-contact seal ring bearing is very small. There is no gap between the sealing lip and the inner ring of the contact seal ring bearing, which has a good sealing effect, but the friction increases.
For occasions with low noise requirements, 60 and 62 series deep groove ball bearings with smaller sizes are often used. Whether open bearing, bearing with dust cover or bearing with sealing ring, the requirements of low noise and low vibration can be put forward when ordering. The allowable vibration values of low, medium and high frequency bands of vibration levels V1, V2 and V3 are specified in JB (machinery industry standard) of China. SKF can also provide ultra-low noise bearings, which are marked with rear code qe5.
The standard deep groove ball bearing with stop groove has a rear code of N, and the rear code of the bearing with stop groove and stop ring is Nr. in addition, there are structural variants such as Zn and ZNR. In addition to the function that the deep groove ball bearing can bear the radial load, the stop ring can limit the axial displacement of the bearing, simplify the axial structure of the bearing seat and reduce the axial size.
Bearings with stop grooves and stop rings are mostly used in working parts with small axial load such as automobiles and tractors.
1. Open bearing refers to the bearing without any sealing cover.
2. For bearings of the same size, customers can choose different materials and grades.
3. The following dimensions are the basic dimensions of bearings according to international standards. If customers have different requirements, we can customize them.
4. The same bearing has different codes and names. Please confirm the size of the bearing you need.