Common Faults Of Sliding Nsk Bearing
Common Faults Of Sliding Nsk Bearing
2022-01-21
Bearing Maintenance In High Speed And Heavy Load Environment
Bearing Maintenance In High Speed And Heavy Load Environment
2022-01-22

Do A Good Job In The Maintenance Of Broken Cone Bearings To Effectively Prolong The Service Life Of Cone Crusher Bearings

Broken Cone Bearings 

The daily maintenance of cone crusher and other equipment is of Cone Bearings great significance to improve the production efficiency and prolong the service life of the machine.

Then how to effectively maintain the Cone Bearings bearing? The measures are as follows:

1. Before installing the cone crusher, first count the number of parts, check and remove the damage caused by Cone Bearings the machining surface and thread of each part during loading, unloading and handling.

2. When installing the cone crusher, the fixed contact surface shall be Cone Bearings coated with dry oil and the movable surface shall be coated with thin oil. In particular, after the bearing is installed, the outer ring must be obliquely coated with bearing lubricant.

3. The lubricant coating of the bearing is also very particular. When applying grease lubrication, cover all roller surfaces. After coating, restore the Cone Bearings position of the outer ring, and cover it with plastic film to prevent dust.

4. During daily use, pay attention to cleaning the bearing. First put the bearing into the oil, then brush off the dirt on the bearing surface with a Cone Bearings brush, then heat the oil appropriately, and then clean the balls and holes inside the bearing in detail.

Do A Good Job In The Maintenance Of Broken Cone Bearings To Effectively Prolong The Service Life Of Cone Crusher Bearings

5. After the cone crusher works for a period of time, it shall be inspected regularly.

Remove the hardware. If the bearing is less worn, it can be turned on the lathe to achieve the correct geometry. At the same time, pay attention to the clearance between eccentric shaft and bearing bush and between spindle and bearing bush. If it exceeds 1.5 times, it shall be replaced or padded for adjustment.

The bearings are imported from Japan NSK or Sweden SKF and other international famous brand bearings, which are durable! Many customers often don’t know why there are great price differences between different Cone Bearings manufacturers for products that look similar on the surface!

Taking bearings as an example, imported NSK or SKF bearings are much higher than domestic Wafangdian bearings, not to mention that some manufacturers often use local materials, the production cost is very low, and they can naturally sell at a very low price, but the difference in product quality is very large in this little “Jerry building”!

When buying a crusher, compare the price, quality and after-sales. What Cone Bearings you finally buy is an economic benefit. Customers must compare with each other when choosing a cone crusher manufacturer. Do not blindly stare at the price and regret!

Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
None of our operators are available at the moment. Please, try again later.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad