First of all, the spindle Koyo Correct Maintenance bearing in the spindle shall be fully lubricated during operation, and the lubricating oil shall be added regularly according to the actual use condition. The oil shall not be cut off for a long time.
Therefore, users and enterprises should choose better and more appropriate spindle lubricating oil. The new special spindle oil can significantly improve the lubrication performance, prolong the oil change cycle, prolong the service life of spindle and Koyo bearing, and also has good anti rust and anti-corrosion properties.
Secondly, there are about 150000 varieties and specifications of Koyo bearing products imported from the world. The service Correct Maintenance temperature of Koyo bearing with reinforced nylon cage should be lower than 120 ℃, and oil boiling and cleaning are strictly prohibited.
In addition, attention should be paid to the maintenance and Correct Maintenance cleaning of the spindle to prevent damage and scratch on the roller surface. To remove the residue of Koyo bearing as much as possible, it is better to wash and suck the residual oil inside the spindle foot.
Pay attention to avoid using Correct Maintenance dumping type to accumulate cleaning waste and leave it on the Koyo bearing, resulting in noise, wear and failure of Koyo bearing.
The fatigue life, noise life and lubrication life of Koyo bearings are just Koyo bearings. During the operation of the rolling Koyo Correct Maintenance bearing, it receives a certain load, that is, static load.
However, for the steel ball and raceway, the stress goes back and forth in cycles, and the data will be ignited, rolling fatigue will occur, and then the Koyo bearing will Correct Maintenance reach its service life. The phenomenon is that a part of the rolling surface data suddenly falls like fish scales.
This phenomenon is called burnout peeling. The noise life of the Koyo bearing of household appliances is very short. The load received by the Koyo bearing is Correct Maintenance very small, and the service life of the Koyo bearing is very long. However, after Koyo bearing operates for a period of time,
it will also suffer from wear, Correct Maintenance increased vibration and noise, deterioration of lubricating grease, etc. Because of the serious request for the noise of the Koyo bearing of household appliances, when the noise of the Koyo bearing exceeds the allowable local limit,
it is considered that the Koyo bearing can not continue to be used. The total time of low noise operation of Koyo bearing is called Koyo bearing noise life. Lubrication life
The Koyo bearing of household appliances adopts maintenance free grease lubricated sealed Koyo bearing on weekdays. Although only a small amount of lubricant is required for Koyo bearing lubrication, after a long time of operation,
due to the deterioration and leakage of grease, Koyo bearing lubrication is poor, and then Koyo bearing fails. The total time when Koyo bearing operates under superior lubrication is called Koyo bearing life.