by 
There may be many factors that affect the service life of SKF Bearing. The factors that may lead to and the internal friction sound have been further explained. The main factors used for adjustment are installation, use and Correct Skf Bearing maintenance, maintenance and repair, which meet the technical requirements.
According to the technical requirements of bearing installation, use, maintenance and maintenance, the contact load, speed and lubrication status of the operating bearing are monitored and inspected. The direct cause of abnormality is found and adjusted back to normal. 1. Select appropriate viscosity and good viscosity temperature
In order to ensure that the spindle temperature of the machine tool is not too high to cause thermal Correct Skf Bearing deformation of the machine tool, affect the machining accuracy or make the bearing lubrication poor,
the lubricating oil with appropriate temperature should be selected according to the spindle bearing structure, speed and bearing clearance, and it is required to have good viscosity temperature characteristics,
so as to prevent the lubricating Correct Skf Bearing performance from being affected by the excessive change of viscosity when the working temperature and ambient temperature of the spindle change greatly.
2. Choose good lubricity
In order to keep a uniform oil film between the contact surface of the main shaft and SKF Bearing, and the oil film will not be damaged when the main shaft starts or stops moving to produce impact load,
and maintain good lubrication Correct Skf Bearing performance, which plays the role of reducing friction and friction heat, reducing the temperature rise of the main shaft and ensuring the machining accuracy, it is required to have good lubrication performance.
When circulating lubrication is Correct Skf Bearing adopted for machine tool spindle, spindle bearing oil is required to be used for a long time without deterioration, so it is required to have good oxidation resistance.
4. Good rust resistance
Because the oil will inevitably mix with condensed water in the air or machine tool coolant during the operation of the spindle lubrication system, the oil is required to have good rust resistance.
5. Machine tool bearing is the main component of precision machine tools and similar equipment. It is very important to ensure the Correct Skf Bearing working accuracy and performance of precision machine tools.
Installation conditions, one of the factors used for bearings is the bearing capacity that often causes the state change between various parts of the incorrect installation package, the primary factor of the abnormal state of SKF Bearing working temperature,
vibration, noise, gradual progress, and the quality of raw materials has been improved. The proportion of raw material quality factor in bearing fault analysis has Correct Skf Bearing decreased significantly, but it is still one of the main factors of bearing failure.
Whether the selection is appropriate or not is still a bearing fault analysis that must be considered. Bearing manufacturing will be adjusted and restored to normal through forging, heat treatment, turning and Correct Skf Bearing lubrication conditions to monitor and check the direct causes of abnormalities.
The installation condition is one of the factors for using the bearing. It is the primary factor of the bearing capacity that often causes the state change between various parts of the incorrect installation package. In the abnormal operation state and the early termination of the inner life,
the main factors refer to the structural design, high-quality manufacturing technology and materials. There are three factors that determine the quality of the bearing.
The bearings are better than others. Even if the shape will turn into a low buzzing sound, there will be knocking noise when injured, which will collide and diverge according to the speed of SKF bearings.