by 
With regard to the knowledge of SKF rolling bearing and bearing pedestal, we are not unfamiliar Detailed Structure with SKF imported bearings. The output of SKF imported bearings accounts for 20% of the total output of similar products in the world.
SKF provides more than 20000 kinds of standard bearings. In addition to SKF rolling bearings, SKF group also manufactures linear bearings, sliding bearings, bearing housings, ball and roller screws, textile machinery parts, retaining rings, machine tools and various precision machinery parts. With extensive experience in the above fields,
we have the indispensable knowledge and expertise to develop, manufacture and apply various advanced engineering Detailed Structure products. Here is a brief introduction to SKF rolling bearing and bearing pedestal:
Bearing seat type: SNL bearing seat, shaft diameter 20-160mm
Option: double lip seal (TG)
Please read the instructions carefully before starting work:
1. SKF rolling bearing installation and disassembly sometimes involve; Moving of heavy objects, use of tools and other equipment or use of high-pressure oil. To Detailed Structure avoid accidents, personal injury or property damage, please carefully follow the relevant instructions.
2. Ensure the environment is clean.
3. Check the dimension and shape tolerance of journal.
4. Check that the surface roughness Ra of the support Detailed Structure surface is not greater than 12.5 μ m。 Flatness tolerance shall be it7. For applications with lower requirements, it8 can be used.
The position of the oil nozzle of the bearing pedestal top cover Detailed Structure shall always be on the other side of the set nut. Attention must be paid to the direction of the whole bearing pedestal, because the top cover and base must be installed in the original direction.
Determine the direction of the Detailed Structure bearing pedestal on the support surface. Install the anchor bolts but do not tighten them.
Insert half of the split double lip seal into the seal grooves on both sides of the bearing pedestal Detailed Structure base. Fill the space between the lips of the seal with grease. If the bearing pedestal is used for the shaft end, insert the end cap on one side to replace the seal.
Install SKF inlet bearing on shaft; Install directly on the step shaft or use a set sleeve. Fill the bearing with grease. Add the remaining part of the recommended filling Detailed Structure amount of grease to both sides of the bearing pedestal base.