스러스트 롤러 베어링
Thrust roller bearing is used to bear axial load mainly shaft, radial combined load, but the radial load shall not exceed 55% of the axial load. Compared with other thrust roller bearings, this kind of bearing friction factor is lower, higher speed, and has the performance of adjusting heart.
Parameters of Thrust roller bearing
| 새로운 국내 모델 | 구 국산 모델 | 내경 (mm) | 외경 (mm) | 너비(mm) | 크롬(kN) | 코르(kN) | 그리스 윤활 속도 (rpm) | 오일 윤활 속도 (rpm) | 무게 (킬로그램) | 세부 정보보기 |
| 29416 | 9039416 | 80 | 170 | 54 | 468 | 1380 | 2000 | – | 5.91 |  |
| 29412 | 9039412 | 60 | 130 | 42 | 293 | 854 | 2700 | — | 2.61 | |
| 29413 | 9039413 | 65 | 140 | 45 | 344 | 1000 | 2500 | — | 3.34 | |
| 29414 | 9039414 | 70 | 150 | 48 | 378 | 1110 | 2300 | — | 4.06 | |
| 29415 | 9039415 | 75 | 160 | 51 | 438 | 1270 | 2100 | — | 4.76 | |
| 29417 | 9309417 | 85 | 180 | 58 | 536 | 1610 | 1900 | — | 7.04 | |
| 29418 | 9039418 | 90 | 160 | 60 | 598 | 1810 | 1800 | — | 8.18 | |
| 29420 | 9039420 | 100 | 210 | 67 | 722 | 2220 | 1650 | — | 11.2 | |
| 29422 | 9039422 | 110 | 230 | 73 | 845 | 2610 | 1500 | — | 14.7 | |
| 29424 | 9039424 | 120 | 350 | 78 | 975 | 3080 | 1350 | — | 18.2 | |
| 29426 | 9039426 | 130 | 270 | 85 | 1130 | 3530 | 1250 | — | 22.8 | |
| 29428 | 9039428 | 140 | 280 | 85 | 1170 | 3790 | 1250 | — | 24.6 | |
| 29430 | 9039430 | 150 | 300 | 90 | 1330 | 4320 | 1100 | — | 29.9 | |
| 29432 | 9039432 | 160 | 320 | 95 | 1480 | 4860 | 1050 | — | 36.2 | |
| 29434 | 9039434 | 170 | 340 | 103 | 1640 | 5340 | 950 | — | 44.3 | |
| 29436 | 9039436 | 180 | 360 | 109 | 1870 | 6110 | 900 | – | 52.6 | |
| 29438 | 9039438 | 190 | 380 | 115 | 2040 | 6730 | 850 | — | 60.7 | |
| 29440 | 9039440 | 200 | 400 | 122 | 2250 | 7580 | 800 | – | 72.2 | |
| 29444 | 9039444 | 220 | 420 | 122 | 2300 | 7910 | 750 | — | 74.9 | |
| 29448 | 9039448 | 240 | 440 | 122 | 2390 | 8500 | 700 | — | 80 | |
| 29452 | 9039452 | 260 | 480 | 132 | 2870 | 10400 | 650 | — | 104 | |
| 29456 | 9039456 | 280 | 520 | 145 | 3380 | 12000 | 550 | — | 134 | |
| 29460 | 9039460 | 300 | 540 | 145 | 3360 | 12000 | 550 | – | 142 | |
| 29317 | 9039317 | 85 | 150 | 39 | 287 | 927 | 2600 | – | 2.82 | |
| 29318 | 9039318 | 90 | 155 | 30 | 299 | 966 | 2500 | – | 3.06 | |
| 29320 | 9039320 | 100 | 170 | 42 | 355 | 1160 | 2300 | — | 3.81 | |
협력 브랜드
스러스트 롤러 베어링의 제품 설명
Cylindrical Roller Thrust Bearings
Thrust cylindrical roller bearings can only accept axial loads, but support high load applications and provide high axial rigidity. Cages are usually machined from brass.
특징
- High Load Capacity/High Rigidity
The design is structurally simple, providing high axial load capacity and rigidity. - Ideal for low speeds
Cylindrical roller thrust bearings have a compact cage design, although they are not suitable for high speeds due to differential sliding of the rollers.
Tapered Roller Thrust Bearings
These are thrust bearings using tapered rollers. Single tapered thrust bearings include those with and without ribs on the housing raceway washers, as well as the full complement roller type. Double-type bearings are mainly used to support axial loads, such as those on rolling mill roll necks.
Spherical Roller Thrust Bearings
Spherical roller thrust bearings are self-aligning and are therefore unaffected by mounting errors and shaft deflection. The E-type is designed for higher load capacity and features a drawn steel cage. We recommend machined brass cages for horizontal shafts and high speed applications. As these bearings have many areas that are difficult to reach with grease, oil lubrication is used even at low speeds. Cages are usually made of machined brass.
Needle Roller Thrust Bearings
Needle thrust bearings are equipped with a dimensionally stable cage that reliably holds and guides a large number of needle rollers.Axial needle roller bearings
provide a high degree of rigidity in a minimum of axial space. In applications where the surface of an adjacent machine component can serve as a raceway, thrust needle roller bearings take up no more space than conventional thrust washers.
Roller Thrust Bearing Washers
There is a range of thrust bearing washers available for purchase. Available washer types are: self-aligning washers, housing washers, raceway washers, thrust washers and low profile general purpose washers. Compatible bearing type options include thrust cylindrical roller and thrust needle roller. Available in various inner and outer diameters.
스러스트 롤러 베어링의 적용
- Thrust cylindrical roller bearings and thrust tapered roller bearings are suitable for low speed applications. The speed of thrust tapered roller bearings is slightly higher than that of thrust cylindrical roller bearings. Thrust cylindrical roller bearing is a kind of separated bearing, can only bear one-way axial load and slight shock, and limit the shaft (or shell) in a direction of axial displacement, for one-way axial positioning. 하지만, its bearing capacity is much greater than that of thrust ball bearings. Roller rolling, due to the roller ends of the linear velocity is different, the roller will inevitably slide in the raceway of the collar. 그러므로, the limit speed of these bearings is lower than the thrust ball bearings, usually only for low speed operation.
- Spherical thrust roller bearings are widely used in the steel industry, mining and construction, paper machinery, 풍력 발전 용 터빈, 공작 기계, gearboxes, 모터, pumps and compressors as well as injection moulding machines.
Factory and Warehouse Display
SKF,궐련,NSK,KBS, NTN 및 기타 브랜드의 베어링 및 고객의 요구에 따라 맞춤형 특수 베어링 생산, 우리 창고의 상자에 포장, and are waiting to be packaged and delivered to your hands.Please send us the bearing model you need, and we will give you the best thrust roller bearing price.
배송 & 스러스트 롤러 베어링 패키지
선적 항구: 칭다오/천진
공급 능력: 100,000 한 달에 조각
패키지：
- 비닐 봉투 + 단일 상자 + 판지 상자 + 합판 팔레트
- 중립 산업 포장 + 중립 판지 포장 + 짚자리
- 고객 요구 사항에 따라
왜 우리를 선택 했죠
- 샘플 요구 사항: 이메일 또는 무역 관리자를 통해 저희에게 연락하십시오, 우리는 귀하의 요구 사항에 따라 샘플을 보낼 것입니다.
- 세계적 수준의 베어링: 세계 최고 품질의 국산 베어링을 고객에게 제공합니다..
- OEM 또는 비지지 베어링: 업계에서 풍부한 지식과 인맥을 보유하고 있기 때문에, 비표준 베어링에 대한 모든 요구 사항을 쉽게 충족할 수 있습니다..
- 정품 제품의 뛰어난 품질: 제공한다는 것을 회사에서 입증하고 있습니다. 100% 진정한 의도를 가진 고품질 제품.
- 애프터 서비스 및 기술 지원: 회사는 고객의 요구 사항과 필요에 따라 애프터 서비스 및 기술 지원을 제공합니다..
- 빠른 배달: 회사는 간소화된 공급망을 통해 정시 배송을 제공합니다..
- 비용 절감: 우리는 장수를 제공합니다, 방진, 고품질 및 더 나은 성능의 고신뢰성 베어링. 이것은 비용 절감을 증가시킵니다.
- 고객에게 응답’ 시간의 질문: 우리는 고객이 만족한다면, 우리의 가치를 증명합니다.
고객은 항상 빠른 지원을 받습니다..
뜨거운 제품
블로그
자주하는 질문
The fixed side rings (outer rings) do not require particularly precise positioning; however, guides should be used to prevent the raceways from deflecting and protruding from the rolling surfaces of the rollers.
This clearance is recommended for thrust ball bearings, as they may be subjected to radial loads. Cylindrical roller thrust bearings are not designed to withstand radial loads and therefore do not require such a large clearance.
With the exception of cylindrical roller thrust bearings and some tapered roller thrust bearings (type TTF), thrust roller bearings can theoretically withstand radial loads as a proportion of the axial load. 하지만, stable operation under these conditions requires careful restriction. For this reason, we mainly recommend thrust roller bearings for axial load applications.
Hot Tags:
- thrust ball bearing manufacturers
- banded roller thrust bearing
- needle thrust bearing skf
- needle thrust bearings and washers
- combined needle roller thrust bearing202 bearing price
- stainless steel needle roller thrust bearings
- nta 1625 needle thrust bearing
- axk 85110 베어링