by 
There may be many factors affecting the service life of Koyo imported bearings. The factors that may lead to and the internal To Judge friction sound have been further explained. The main factors used for adjustment are installation, use and maintenance, maintenance and repair, which meet the technical requirements.
According to the technical requirements for the installation, use, maintenance and To Judge maintenance of Koyo imported bearings, the contact load, speed and lubrication status of the bearings are monitored and inspected. The direct cause of abnormality is found and adjusted back to normal.
Installation conditions, one of the factors used for bearings is the load-bearing force that often causes the change of state To Judge between various parts of the incorrect installation package, the primary factor of abnormal state of bearing working temperature,
vibration, noise, gradual progress, and the quality of raw materials has been improved. The To Judge proportion of raw material quality factor in bearing fault analysis has decreased significantly, but it is still one of the main factors of bearing failure.
Whether the selection is appropriate or not is still a bearing fault analysis that must be To Judge considered. Bearing manufacturing will be adjusted and restored to normal through forging, heat treatment, turning and lubrication conditions to monitor and check the direct causes of abnormalities.
The installation condition is one of the factors for using the bearing. It is the primary factor of the bearing capacity that often causes the state change between various parts of the incorrect installation package.
In the abnormal operation state and the early termination of the To Judge inner life, the main factors refer to the structural design, high-quality manufacturing technology and materials. There are three factors that determine the quality of the bearing.
Even if the shape turns into a low buzzing sound, there will be To Judge knocking noise when injured. This noise will collide and diverge according to the speed of Koyo imported bearings.
If there is intermittent noise, it is through. If sharp’s hissing sound, squeaking sound and other To Judge sounds do not follow the rules, the poor performance of Koyo imported bearings is often revealed, or even reverse the situation.
Sharp squeaky noise is not appropriate because it is smooth and flat. Improper Koyo inlet bearing clearance will form metal sound. It will cause vibration. The outer track of Koyo inlet bearing is concave and retracted, forming a smooth and loud sound. If the components of the equipment are damaged due to the performance of the roll.
If any contaminant often causes a hissing sound, this sound is the To Judge date that Koyo imported bearings are damaged when rolling. Serious damage will occur in the order of rules, but not a lot of noise.
The early rolling failure of Koyo imported bearings is a major factor affecting the metallurgical quality. With the development of Metallurgical Technology (such as bearing steel, vacuum degassing, etc.) and other multi-channel processing and assembly processes.