Analysis on the Influence of IKO Bearing Fault and Damage on Its Use
Analysis on the Influence of IKO Bearing Fault and Damage on Its Use
2022-03-22
Three Factors of NSK Bearing Failure
Three Factors of NSK Bearing Failure
2022-03-22

Regular Flow Cleaning Process of IKO Bearing Rust Prevention

Regular Flow Cleaning Process of IKO Bearing Rust Prevention

  • The quality of antirust materials directly affects the quality of product processing. Therefore, when selecting antirust materials, the physical and chemical properties shall be tested according to the quality requirements first, and then the pilot test shall be carried out after being qualified.Regular Flow Cleaning Process of IKO Bearing Rust Prevention
  • Only when meeting the process requirements can they be used in large quantities. The antirust auxiliary materials selected for use shall be strictly tested according to the quality standards of different materials after entering the factory. Only after they are qualified can they be issued and used by the supply department. Regular Flow Cleaning Process of IKO Bearing Rust Prevention
  • During use, the antirust materials and the prepared solution shall be tested regularly to ensure that the concentration and proportion of the solution meet the process requirements and meet the service performance. 
  • The establishment of a complete material acceptance system and quality acceptance standards provides a reliable guarantee for doing a good job in rust prevention management.Regular Flow Cleaning Process of IKO Bearing Rust Prevention
  • Cooling water mainly plays multiple roles in IKO bearing processing, such as cooling, lubrication, cleaning and rust prevention. Its correct use and maintenance directly affect the surface quality of processed parts and the service life of cutting tools. The cooling water used for IKO bearings can be roughly divided into soda water, emulsion and synthetic grinding fluid. Regular Flow Cleaning Process of IKO Bearing Rust Prevention
  • Basically, more than 50 tons of groove fluid is used for large-scale circulation. The washed grinding products, grinding wheel dust, iron filings and oil stain are easy to cause the corruption and deterioration of cooling water, resulting in burns and corrosion of processing parts. Strengthening the scientific management of cooling water can improve its performance, ensure product quality and reduce the use cost of cooling water breaing.
Regular Flow Cleaning Process of IKO Bearing Rust Prevention
  • In order to ensure that the antirust process can be seriously implemented, the technology department formulates specific assessment rules according to the process requirements, and converts the component value to assess the manufacturer. Regular Flow Cleaning Process of IKO Bearing Rust Prevention
  • The first-class antirust management personnel shall conduct a monthly process discipline inspection on the production plant, conduct a comprehensive inspection on the management of cooling water, antirust fluid, cleaning fluid and antirust oil, the corrosion rate.
  • cleanliness and oil coating packaging of finished IKO bearings, the management level of antirust personnel and the detection of monitoring items, score the assessment, and send the assessment results to the production plant. Establish a rust prevention management network from top to bottom, so that the rust prevention work has a good management foundation.Regular Flow Cleaning Process of IKO Bearing Rust Prevention
  • 1. When a large number of IKO bearings need to be cleaned, first melt the oil seal with hot engine oil with a temperature of 90 ~ 100 ℃, then empty the old engine oil with a clean tool, then scald it for a while, then rinse the excess engine oil with hot oil, and then spray it with hot gasoline again.Regular Flow Cleaning Process of IKO Bearing Rust Prevention
  • 2. When cleaning the surface of IKO bearing, clean gasoline, kerosene and other solutions should be selected for cleaning. After confirming the cleaning, wipe it dry with a clean rag, and then apply a thin layer of lubricating oil on it, and then install it according to the standard installation process.Regular Flow Cleaning Process of IKO Bearing Rust Prevention
  • 3. When everything is checked and ready to open the IKO bearing package, put the bearing into gasoline and other cleaning liquid, and then gently rotate the outer set of the bearing by hand, so as to clear the surface of the roof and the sundries in the ball raceway.Regular Flow Cleaning Process of IKO Bearing Rust Prevention
Technical requirements for Timken non-standard bearing
Chat with us
Chat with us
Questions, doubts, issues? We're here to help you!
Connecting...
None of our operators are available at the moment. Please, try again later.
Our operators are busy. Please try again later
:
:
:
:
Have you got question? Write to us!
:
:
This chat session has ended
Was this conversation useful? Vote this chat session.
Good Bad