Precautions for maintenance and installation of eccentric IKO Cam Follower bearing

 Maintenance of eccentric IKO Cam Follower bearing:

1. In order to maintain the original performance of IKO Cam Follower  bearing in good condition for as long as possible, maintenance and repair are required to prevent accidents, ensure the reliability of operation, and improve the productivity and economy.
2. Maintain the operation standard of the corresponding mechanical operation conditions and carry out it regularly. The contents include monitoring the operation status, replenishing or replacing the lubricant, and regular disassembly inspection.
3. As maintenance items during operation, there are rotation sound, vibration, temperature, lubricant state of eccentric IKO bearing, etc.

Maintenance of eccentric IKO Cam Follower bearing: cleaning of IKO Cam Follower bearing:

1. When disassembling the eccentric IKO bearing for maintenance, first record the appearance of the eccentric IKO bearing, confirm the residual amount of lubricant, and then clean the eccentric IKO Cam Follower bearing after sampling the lubricant for inspection. Gasoline and kerosene are commonly used as cleaning agents.
2. The removed eccentric IKO bearing shall be cleaned by coarse cleaning and fine cleaning. They shall be placed in the container, and the metal mesh shall be placed on the bottom first to prevent the IKO bearing from directly contacting the dirt of the container. During rough cleaning, if IKO bearing rotates with dirt, the rolling surface of IKO bearing will be damaged, and attention should be paid. In the coarse cleaning oil, use a brush to remove the grease and adhesion, and then transfer to the fine cleaning.
3. Fine cleaning is to carefully clean the eccentric IKO bearing while rotating in the cleaning oil. In addition, the cleaning oil should always be kept clean.

Maintenance and judgment of eccentric IKO Cam Follower bearing

1. In order to judge whether the disassembled IKO bearing can be used, it should be inspected after the IKO bearing is cleaned. Check the state of the raceway surface, rolling surface and mating surface, the wear of the cage, the increase of the clearance of IKO bearing and the damage caused by the irrelevant reduction of dimensional accuracy. For non separable small ball IKO bearing, use one hand to support the inner ring horizontally and rotate the outer ring to confirm whether it is smooth.