Rust Prevention And Maintenance Of Timken Bearing
Rust Prevention And Maintenance Of Timken Bearing
2022年2月5日
Assembly, Disassembly And Maintenance Of Nsk Bearing
Assembly, Disassembly And Maintenance Of Nsk Bearing
2022年2月5日

Maintenance And Damage Countermeasures Of Iko Imported Bearing

Maintenance And Damage 

1. Maintenance, overhaul and abnormal handling of IKO imported bearings

In order to maintain the original performance of the bearing in good condition for as long as possible, it is necessary to And Damage maintain and repair in order to prevent accidents, ensure the reliability of operation and improve productivity and economy.

Maintain the operation standard of corresponding mechanical And Damage operation conditions and carry out it regularly. The contents include monitoring the operation status, replenishing or changing lubricants, and regular disassembly inspection.

As maintenance items in operation, there are bearing rotation sound, vibration, temperature, lubricant state, etc.

2. Damage and Countermeasures of IKO imported bearing

Generally, if the bearing is used correctly, it can be used until the fatigue life is reached. However, And Damage there will be accidental and premature damage, which is not resistant to use.

This early damage, as opposed to fatigue life, limits the use of quality known as failure or And Damage accident. Most of them are caused by careless installation, use and lubrication, foreign matters invading from the outside, and insufficient research on the thermal effects of shafts and shells.

As for the damage state of IKO imported bearing, for example, the clamping damage of the ring And Damage retaining edge of roller bearing can be considered as the reason.

These reasons also coincide with insufficient lubricant, unsuitable, defects of oil supply and drainage And Damage structure, invasion of foreign matters, bearing installation error and excessive deflection of shaft. 

Maintenance And Damage Countermeasures Of Iko Imported Bearing

Therefore, it is difficult to know the real cause of the damage only by investigating the damage of IKO imported bearings.

However, if we know the use And Damage machinery, service conditions, the structure around the bearing, understand the situation before and after the accident, and investigate the damage state of the bearing and several causes, we can prevent the recurrence of similar accidents.

Precautions for the use of IKO imported bearings are as follows:

Keep IKO imported bearing and its turnover clean

Even small dust that cannot be seen by the eyes will have a bad And Damage impact on IKO imported bearings. Therefore, keep the surroundings clean so that dust will not invade the IKO inlet bearing.

Use with care

When the IKO imported bearing is strongly impacted in use, it will produce scars and indentation, which will become the cause of the accident. In serious cases, it will crack and fracture, so we must pay attention to it.

Use appropriate IKO imported operating tools

Avoid replacing with existing tools and bearing tools, and appropriate tools must be used. We often emphasize the importance of tools because too many customers used the wrong tools during installation, resulting in the damage of IKO imported bearings.

Pay attention to the corrosion of IKO inlet bearing

When operating IKO imported bearings, sweat on your hands will become the cause of rust. Pay attention to operate with clean hands and wear gloves as much as possible.