SKF NJ311 ECP.C5 Bearings
Timken NJ311 ECP.C5 Bearings
NSK NJ311 ECP.C5 Bearings
NTN NJ311 ECP.C5 Bearings
Koyo NJ311 ECP.C5 Bearings
NACHI NJ311 ECP.C5 Bearings
|Product Name||vehicle bearing|
|Part Number||NJ311 ECP.C5|
|Bearing Type||roller bearing|
|Heat treatment||Bainite Salt Bath|
|Stock status||Rich stock, guarantee quick delivery|
Neutral single box without any brand;
Customer’s special request is accepted;
Impact-resistant, dust-resistant, high-strength self-lubricating bearings not only solve the problem of lubrication, but also reduce noise and prolong service life, especially in harsh mines and field operations equipment; such as the large and small arm bearings of excavators, chassis walking mechanism, hydraulic cylinder oil pump, etc. In order to ensure reliable operation under high-intensity working conditions, bearings play a very important role in construction machinery. In all corners of construction machinery, from excavators, pavers, sorting machines, concrete machines to forklifts and other transportation equipment, high-performance bearings are widely used. Our bearings are designed to meet increasing demands for better output, longer maintenance intervals, lower noise and environmentally friendly operation
Shipping port: Qingdao/Tianjin
Supply Ability: 100,000 pieces per month
Due to their internal design, ball bearings cannot usually be disassembled down to the component level; therefore, they cannot usually be refurbished.
Solid base shells are manufactured without cavities and fillers; they are stronger than hollow bases, and there are no traps for bacteria and fungi to grow. In the thermoplastic shell, the sturdy base will not break under steam or high-pressure washing. The hollow base saves material and weight to reduce costs. Some people use epoxy resin to backfill the hollow base to eliminate the trap of bacteria breeding, but this will not increase the strength, will cause the installation surface to be uneven, and water will seep between the shell and the filling material, causing cracking.
Use particularly thermally stable bearing rings, larger internal clearance (C4), specially selected lubricants that will not decompose at high temperatures, and zinc anodized flinger. There are two basic versions of our high temperature bearings. The suffix “C4HR5” represents the bearing that can withstand 400°F, and the suffix “C4HR23” represents the bearing that can withstand 450°F.
For critical applications such as pulp and paper processing, printing and packaging, material tearing can cause expensive downtime due to excessive torque and vibration.
The two biggest factors affecting the starting and running torque of the bearing are the seal design and lubricant selection. The shaft and bearing seat fit, component accuracy and surface finish, and retainer design also have some influence.
In higher speed applications, non-contact sealing devices are usually required to minimize operating torque and heat generation, so oil baffle rings and secondary sealing devices are usually required. Flowing oil lubrication systems are usually the best solution.
After proper installation, most seated bearings only need to be relubricated regularly with a small amount of grease and checked to ensure that they operate at low temperatures, quietness, and sufficient accuracy.
This depends on many factors, such as the application’s load conditions, operating speed, duty cycle, temperature, and operating environment. The technical information section of this website provides some basic information. Our engineers can help you determine more specific theoretical life calculations.
When noise and/or operating temperature increase or operating accuracy decreases, bearings should be replaced.
Lubricant of choice
Lubrication joint type or location
Sealing materials and design options
Dimensions, suitable for housing or insert
Fixing screw options
Paint the shell in any color
Too little or too much lubricant
Incorrect lubricant type
Poor bearing installation
Improper internal clearance
Excessive load and/or speed
Movement between mounting surfaces
The noise emitted by the bearing may be caused by a combination of one or more factors, such as insufficient working clearance, excessive working clearance, changes in working clearance due to temperature, damage to the contact area, contamination, inappropriate lubricants or The raceway is damaged.
Lubricants have five basic functions for bearings:
Reduce temperature rise
We do not recommend mixing grease. Mixing incompatible greases will cause the mixture to harden, preventing it from releasing any oil. Mixing incompatible greases can also soften the mixture, which releases all the oil. In either case, the mixture will not be able to properly lubricate the bearing. We strongly recommend using the same type of grease originally provided with the bearing.