발전

Power generation requires uninterrupted bearing service. The ball and roller bearings for the pumps, compressors, electric motors and drives must meet critical internal clearances, cage designs and Abec precision class. Pillow Block bearings have to be a design that allows for easy and prompt replacement.
Special Solution: The Craft Split Roller block allows for rapid replacement to save downtime and costs. We also recommend high end lubricants such as Kluber or Lubriplate for critical locations to better match lubricant service life to bearing B 10 life ratings.Available in both Inch and Metric shaft variations for next day delivery.

Wind Turbines/Harnessing the Wind

The centuries old dream of harnessing the wind efficiently is now a reality. The Wind turbines of today often stand 250 feet in the air and are mechanical and technical marvels that rely on bearings in their key components:

Gearbox

Increasing megawatt ratings require larger and higher capacity gearboxes. The operating conditions for rolling bearings in wind turbine gearboxes cannot be compared with those for static gearboxes. Highly dynamic forces with extreme peak loads and minimal loads, sudden load reversals and widely differing operating temperatures are some of the challenges facing the bearing arrangements. Bearings must have high static load safety factors. Bearings used are roller bearings, deep groove ball bearings and four point contact bearings

Generator

A generator operating in the nacelle of a wind turbine is subjected to significantly greater vibration loads than its counterpart on the ground. This additional permanent load has a negative influence on the cages and places a strain on the lubricant.In the design of bearings for a generator, it is not only the size and design that play an important role. Special attention must be paid to the lubrication and protection against possible current passage.The bearing arrangement of a generator generally contains a combination of deep groove ball bearings or cylindrical roller bearings.The passage of current in a wind turbine generator can cause serious damage to the raceways of bearings in the form of melt craters and false brinelling. It is advised to use current insulated bearings in many applications.

Wind tracking and Blade adjustment

It is critical that the turbines be aligned optimally to the wind. This is controlled by:
Blade bearings (pitch bearings): In order to control the power output of the wind turbine, the blade angle must always be adjusted to the wind speed via the rotary motion of the blade bearing. Single or double-row four point contact bearings with or without gear teeth on the inner or outer ring are used here.
Yaw bearing: A slewing ring is required in order to adjust the position of the nacelle to the wind direction. The wind load and the dynamic inertia forces are transferred via the raceways and the screw connections into the tower head. Single or double row four point contact bearings are used here.
Blade adjustment: The rotor angle can be adjusted using electric or hydraulic systems. These use sealed spherical bushings that have corrosion protection.

협력 브랜드

SKF bearing
팀켄 베어링
팀켄 베어링
NSK 베어링
NTN bearing
Koyo bearing
NACHI bearing
FAG bearing
INA bearing

제품 카테고리

깊은 홈 볼 베어링
깊은 홈 볼 베어링
테이퍼 롤러 베어링
자동 정렬 볼 베어링
자동 정렬 볼 베어링
스러스트 볼 베어링
실린더 롤러 베어링
스러스트 롤러 베어링
구면 롤러 베어링
베개 블록 베어링
앵귤러 콘택트 볼 베어링
수입 Koyo 베어링에 대한 진동의 영향
니들 롤러 베어링
우리와 채팅
우리와 채팅
질문, 의심, 문제? 우리는 당신을 돕기 위해 여기 있습니다!
연결 중...
현재 사용할 수 있는 운영자가 없습니다.. 제발, 나중에 다시 시도.
우리 교환원은 바쁘다. 나중에 다시 시도 해주십시오
:
:
:
:
질문있어?? 우리에게 쓰기!
:
:
이 채팅 세션이 종료되었습니다
이 대화가 유용했습니까?? 이 채팅 세션에 투표.
좋은 나쁜