by 
Bearing is the main component of motor, transmission shaft and other equipment. Its reliability and service life play a vital role in the normal operation of mechanical equipment. If the bearing faults of mechanical equipment occur frequently, it will inevitably bring a lot of inconvenience to the normal production of enterprises. Bearing failure is usually caused by lubrication, installation mode, operating conditions, working load and other factors, and improper bearing lubrication is the main cause of premature bearing damage, so constant time and constant quantity lubrication of mechanical equipment bearings is very important
This is the original method. When the lubricating oil of the bearing is insufficient, use the oiler to supply oil. However, this method is difficult to maintain a certain amount of oil, and there is a great risk of forgetting to refuel due to negligence. It is usually only used for occasions with a light load, low speed or intermittent movement. When it is easy to operate, a dust cover or ball valve shall be set on the refuelling hole, and felt, cotton, wool, etc. shall be used as the filtering device.
An automatic oiler is a device used to replace manual refuelling. The main advantage of this device is to save labour. It can regularly and quantitatively refuel, so as to prolong the service life of the equipment. It is especially suitable for complex working conditions and reduces the safety risk of manual refuelling. Using the automatic oiler, you can continuously automatically inject oil and lubrication into the running equipment, and you can reduce accidental shutdown and maintenance costs. In addition, the automatic oiler is more and more balanced than the traditional manual oiling. In general, automatic lubrication is safer and more efficient than manual lubrication.